When using NI, is it best to sharpen your image first (if needed), or do it after you have removed the noise? I have noticed that if I remove the noise, then sharpen, the noise seems to be increased again. Also, the more noise etc I remove, the softer the image gets.
Also, do most people on here use the automatic 'Remove Noise' tab, or do it yourself manually?
Sorry for all the questions. It's just I am new to NI and just want to get the best out of it.
Thanks!
Sharpen First or After?
Regarding sharpening, please see this Q and A.
On adjusting the filter settings in the Noise Filter Setttings tab, I usually adjust them only in difficult cases. With an accurate noise profile, the default filter settings work well for me.
Vlad
On adjusting the filter settings in the Noise Filter Setttings tab, I usually adjust them only in difficult cases. With an accurate noise profile, the default filter settings work well for me.
Vlad